Screen Protector Not Sticking On Edges - JOE TECH (2024)

Introduction

Screen protectors are an essential part of protecting your device from scratches, dirt, and other damage. However, many people have experienced the frustration of having their screen protector not sticking on the edges of their device. This can be caused by a variety of factors, such as improper installation, dust, or even the type of screen protector you are using. In this article, we will discuss the common causes of screen protector not sticking on the edges and provide tips on how to fix the issue.

How to Troubleshoot When Your Screen Protector Isn’t Sticking On the Edges

If you have recently applied a screen protector to your device and it is not sticking to the edges, there are a few steps you can take to troubleshoot the issue.

First, check to make sure that the screen protector is the correct size for your device. If it is too small, it will not be able to adhere properly to the edges. If the protector is too large, it may be difficult to get it to stick to the edges.

Second, make sure that the surface of the device is clean and free of dust and debris. Any dirt or dust on the surface can prevent the screen protector from sticking properly. Use a microfiber cloth to gently wipe the surface of the device before applying the screen protector.

Third, make sure that the adhesive side of the screen protector is free of dust and debris. If there is any dirt or dust on the adhesive side, it will prevent the protector from sticking properly. Use a microfiber cloth to gently wipe the adhesive side of the screen protector before applying it.

Fourth, make sure that you are applying the screen protector correctly. Start by aligning the protector with the edges of the device and then slowly press it down from the center outwards. This will help ensure that the protector is properly adhered to the edges.

Finally, if the screen protector still isn’t sticking to the edges, you may need to use a small amount of adhesive to help secure it. Use a small amount of adhesive on the edges of the protector and then press it down firmly.

By following these steps, you should be able to troubleshoot any issues you are having with your screen protector not sticking to the edges.

The Benefits of Using a Screen Protector That Sticks On the Edges

Screen protectors are an essential accessory for any device with a touchscreen. They provide a layer of protection against scratches, dirt, and other damage that can occur from everyday use. However, many people are unaware of the benefits of using a screen protector that sticks on the edges.

Edge-to-edge screen protectors are designed to cover the entire surface of the device’s screen, including the edges. This provides a more comprehensive level of protection than traditional screen protectors, which only cover the flat surface of the screen. Edge-to-edge screen protectors are also more aesthetically pleasing, as they provide a seamless look to the device.

Edge-to-edge screen protectors are also more durable than traditional screen protectors. The adhesive used to attach the protector to the edges of the device is designed to be stronger than the adhesive used for traditional screen protectors. This makes it less likely that the protector will come off or be damaged over time.

Edge-to-edge screen protectors also provide better protection against dust and dirt. The edges of the device are often the most vulnerable to dirt and dust, as they are exposed to the environment more than the flat surface of the screen. By covering the edges with a screen protector, you can help keep your device clean and free of dirt and dust.

Finally, edge-to-edge screen protectors are easier to install than traditional screen protectors. The adhesive used to attach the protector to the edges of the device is designed to be easier to apply than the adhesive used for traditional screen protectors. This makes it easier to install the protector without having to worry about bubbles or other imperfections.

In conclusion, edge-to-edge screen protectors provide a more comprehensive level of protection, are more aesthetically pleasing, are more durable, provide better protection against dust and dirt, and are easier to install than traditional screen protectors. For these reasons, edge-to-edge screen protectors are an excellent choice for anyone looking to protect their device from everyday wear and tear.

Tips for Installing a Screen Protector That Sticks On the Edges

1. Clean the Screen: Before installing the screen protector, make sure to clean the screen with a soft cloth and a cleaning solution specifically designed for electronic devices. This will help ensure that the screen protector sticks properly and does not have any air bubbles.

2. Align the Protector: Carefully align the screen protector with the edges of the device. Make sure that the protector is centered and that all of the edges are lined up properly.

3. Peel the Backing: Peel off the backing of the screen protector and discard it.

4. Apply the Protector: Carefully apply the protector to the device, starting from the top and working your way down. Make sure to press firmly on the edges to ensure that the protector sticks properly.

5. Smooth Out Air Bubbles: Use a soft cloth to smooth out any air bubbles that may have formed during the installation process.

6. Clean the Protector: Once the protector is installed, use a soft cloth and a cleaning solution specifically designed for electronic devices to clean the protector. This will help ensure that the protector sticks properly and does not have any air bubbles.

Common Causes of Screen Protectors Not Sticking On the Edges

Screen protectors are a great way to protect your device from scratches and other damage. However, sometimes they can be difficult to install, especially when they don’t stick to the edges of the device. This can be caused by a variety of factors, including improper installation, dust or dirt on the device, or a defective screen protector.

One of the most common causes of screen protectors not sticking to the edges is improper installation. If the screen protector is not properly aligned with the device, it can cause air bubbles or gaps at the edges. To ensure a proper installation, make sure to clean the device thoroughly before applying the screen protector and use a squeegee to press out any air bubbles.

Another common cause of screen protectors not sticking to the edges is dust or dirt on the device. Even the smallest particles of dust or dirt can prevent the adhesive from making a strong bond with the device. To avoid this, make sure to clean the device thoroughly before applying the screen protector.

Finally, a defective screen protector can also cause the edges to not stick. If the adhesive on the screen protector is not strong enough, it will not be able to form a strong bond with the device. To avoid this, make sure to purchase a high-quality screen protector from a reputable manufacturer.

By understanding the common causes of screen protectors not sticking to the edges, you can ensure a successful installation and protect your device from scratches and other damage.

How to Choose the Right Screen Protector That Sticks On the Edges

When it comes to protecting your device’s screen, a screen protector is an essential accessory. However, it can be difficult to find one that sticks on the edges of your device. To help you make the right choice, here are some tips to consider when selecting a screen protector that sticks on the edges.

First, consider the material of the screen protector. Many screen protectors are made of plastic or tempered glass. Plastic protectors are usually cheaper and easier to install, but they are not as durable as tempered glass protectors. Tempered glass protectors are more expensive, but they offer better protection and are more resistant to scratches and other damage.

Second, make sure the screen protector is compatible with your device. Different devices have different screen sizes and shapes, so it’s important to make sure the protector you choose is the right size and shape for your device.

Third, look for a screen protector that has a strong adhesive. This will ensure that the protector sticks securely to the edges of your device and won’t come off easily.

Finally, consider the thickness of the screen protector. Thicker protectors offer more protection, but they can also make it harder to use your device. If you want a thinner protector, make sure it still offers enough protection for your device.

By following these tips, you can find a screen protector that sticks on the edges of your device and offers the protection you need.

The Best Practices for Keeping Your Screen Protector Sticking On the Edges

1. Clean the Screen: Before applying the screen protector, make sure to clean the screen with a soft cloth and a mild cleaning solution. This will help remove any dirt, dust, or oils that may prevent the screen protector from sticking properly.

2. Remove Air Bubbles: After applying the screen protector, use a soft cloth to press down on the edges and remove any air bubbles. This will help ensure that the screen protector is properly adhered to the edges of the device.

3. Use a Hair Dryer: If you are having trouble getting the screen protector to stick to the edges, try using a hair dryer on a low setting. This will help to heat up the adhesive and make it easier to stick.

4. Use a Tape: If the screen protector is still not sticking to the edges, try using a piece of tape to help hold it in place. This will help to keep the screen protector in place until the adhesive has had time to set.

5. Avoid Excessive Heat: When using a hair dryer or other heat source to help the screen protector stick, make sure to avoid excessive heat. This can cause the adhesive to become too hot and can damage the device or the screen protector.

By following these best practices, you can help ensure that your screen protector stays in place and provides the protection you need.